Attention!
- Maximum duration of a recorded file is seven minutes. After this
time expires a video is recorded into a new file. The number of
recorded files is limited by the capacity of unit's internal memory.
- check regularly the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card.
To playback video files recorded by thermal imaging devices on iOS-
based computers, we recommend that you use
VLC
video player or
Elmedia player.
Download links and QR codes are shown below:
VLC
V
IDEO
P
LA
YER
ELMEDIA VIDEO PLAYER
http://www.videolan.org/
vlc/download-macosx.html
https://itunes.apple.com/us/
app/elmedia-multiformat-video/
id937759555?mt=12
IMPORTANT!
Photo mode. Photography
Switch to the
Photo
mode with a long press of the
(4)
button
.
REC
Take a picture with a brief press of the
REC
button.
The image freezes
for 0.5 sec and a photo is saved to the internal memory.
in the top left corner of the display you can see: photography icon
,
“>100”
means that you can take more than 100 pictures. If the
number of available pictures is less than 100, actual amount of
available pictures (for example 98) is shown next to the icon .
Notes:
- you can enter and operate the menu during video recording;
- recorded videos and photos are saved to the built-in memory card in
the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx – three-
digit counter for videos and photos;
- counter for multimedia files cannot be reset;
Pause and resume recording video with a short press of the
REC
button.
Stop recording video with a long press of the
REC
button.
Video files are saved to the memory card after stopping video.
Switch between modes
(Video-> Photo-> Video
) with a long press of the
REC
button.
24
23
The DISPLAY OFF function deactivates transmission of image to the
display by minimizing its brightness. This prevents accidental disclosure.
The device keeps running.
When the device is on, hold down the
ON/OFF (1)
button. Display goes
out, message
“Display off”
.
To activate the display, press briefly the
ON/OFF
button.
When holding down the
ON/OFF
button, the display shows
“Display
off”
message with countdown, the device will turn off.
FUNCTION DISPLAY OFF
17
Connection status
Status bar indication
WI-FI FUNCTION
Your thermal imager features wireless connection option (Wi-Fi) which
links it with external appliances (smartphone, tablet PC).
Turn on the wireless module in the respective menu option.
Wi-Fi operation is shown in the status bar as follows:
Wi-Fi is off
Wi-Fi activated by the user,
Wi-Fi in the device is being
activated
Wi-Fi is on, no connection with
device
Wi-Fi is on, device connected
Your device is detected by an external device as
“Accolade
LRF_XXXX
”, where
XXXX
– is the last four digits of device's serial
number».
After a password is generated on an external appliance (please refer
to the menu option
“Wi-Fi setup”
of the section “
Main menu
functions”
of this user manual) and connection is established, the
icon
in the status bar changes to .
Summary of Contents for Accolade LRF XP50
Page 1: ...www pulsar nv com ACCOLADE LRF Thermal Imaging Binoculars ...
Page 35: ......
