English
English
11
10
TO PRESERVE THE QUALITY OF YOUR WATCH
WATER RESISTANCE
●
Non-water resistant
●
Water resistance (5 bar)*
If “WATER RESISTANT 5 BAR”
is inscribed on the case back, your
watch is designed and manu-
factured to withstand up to 5 bar
5
bar WR
and is suitable for swimming, yachting and taking
a shower.
If “WATER RESISTANT 10 BAR”,
“WATER RESISTANT 15 BAR”
or “WATER RESISTANT 20 BAR”
is inscribed on the case back,
10/15/20
bar WR
●
Water resistance (10 bar/15 bar/20 bar)*
your watch is designed and manufactured to
withstand up to 10 bar/15 bar/20 bar and is
suitable for taking a bath, shallow diving, but not
for scuba diving. We recommend that you wear
a PULSAR Diver’s watch for scuba diving.
If “WATER RESISTANT” is not
inscribed on the case back, your
watch is not water resistant, and
care should be taken not to get it
If “WATER RESISTANT” is inscribed
on the case back, your watch is
designed and manufactured to
withstand up to 3 bar, such as acci-
●
Water resistance (3 bar)
dental contact with splashes of water or rain, but it is
not designed for swimming or diving.
wet as water may damage the movement. If
the watch becomes wet, we suggest that you
have it checked by an AUTHORIZED PULSAR
DEALER or SERVICE CENTER.
LUMIBRITE
TM
LumiBrite is a newly developed luminous paint that is completely harmless to human
beings and the natural environment, containing no noxious materials such as radioactive
substances.
LumiBrite absorbs the energy of sunlight or artificial light in a short time and stores it to
emit light in the dark. For example, if exposed to a light of more than 500 lux for
approximately 10 minutes, LumiBrite can emit light for 5 to 8 hours.
Please note, however, that, as LumiBrite emits the light it stores, the luminance level of
the light decreases gradually over time. The duration of the emitted light may also
differ slightly depending on such factors as the brightness of the place where the watch
is exposed to light and the distance from the light source to the watch.
When you make a dive in dark water, LumiBrite may not emit light unless it has absorbed
and stored light sufficiently
Before diving, therefore, be sure to expose the watch to light under the conditions
specified above, so that it fully absorbs and stores light energy. Otherwise, use the
watch together with an underwater flashlight.
< Reference data on luminance >
(A) Sunlight
[Fine weather]: 100,000 lux
[Cloudy weather]: 10,000 lux
(B) Indoor (Window side during daytime)
[Fine weather]: more than 3,000 lux
[Cloudy weather]: 1,000 to 3,000 lux
[Rainy weather]: less than 1,000 lux
(C) Lighting apparatus (40-watt daylight fluorescent light)
[Distance to the watch: 1 m]: 1,000 lux
[Distance to the watch: 3 m]: 500 lux (average room luminance)
[Distance to the watch: 4 m]: 250 lux
* “LUMIBRITE” is a trademark of SEIKO CORPORATION.
7S26̲E
05.3.16, 3:23 PM
10-11
