dBi series
Intelligent Transducer
INSTALLATION MANUAL
Full dBi and Pulsar DTM manuals are available free for
download @
M-DBi
—
000-001-4P
Declaration No. 001006
This declaration of conformity is issued under the sole responsibility of
the manufacturer. We, the undersigned:
Name of Manufacturer/
Authorised representative:
Pulsar Measurement
Address:
Cardinal Building
Enigma Commercial Centre
Sandys Road
Malvern
Worcestershire
WR14 1JJ
Country:
UK
Declare under our sole responsibility that the following apparatus:
Apparatus:
Ultrasonic Transducers, HART dBi range for
measurement & process control.
Model or Type
No.:
dBi 3, dBi 6, dBi 10 & dBi 15 Ex ia & Ex mb
versions
Brand name:
HART dBi range
Are in conformity with the following relevant EU legislation:
Directives
Standards
Electrical Safety
2014/35/EU
EN61010-1-2010
EMC:
2014/30/EU
EN61326-1:2013
ATEX general
2014/34/EU
EN60079-0:2012
ATEX Exia (IS)
EN60079-11:2012
ATEX Exmb
EN60079-18:2009
RoHS
2011/65/EU
I declare that the apparatus named above has been tested and
complies with the relevant sections of the above referenced
standards & directives
Notified Body:
Element Materials Technology Rotterdam BV
Notified Body No.: 2812
Certificate Nos.
EMT18ATEX0014X
IEC EMT18.0005X (Ex ia) &
TRAC12ATEX0023X (Ex mb).
ATEX coding: II 1 G Exia IIC T4 Ga & II 1 D Exia IIIC T130°C Da
Tamb -40°C to +80°C
II 2 G Exmb IIC T4 Gb & II 2 D Exmb IIIC T130°C Db
Tamb -40°C to +80°C
Name & position of person binding the manufacturer or authorised
representative:
Signed:
Name:
Tim Brown
Function: Electronics Engineer
Location: Pulsar Process Measurement Ltd.
WR14 1JJ, UK.
Issue date: 5th November 2020.
UK Office
Cardinal Building
Enigma Commercial Centre
Sandy’s Road
Malvern
Tel: +44 (0)1684 891371
WR14 1JJ
Fax: +44 (0)1684 575985
United Kingdom
Website:
Canada Office
16456 Sixsmith Drive
Long Sault
ON
Tel: 613-938-8956
K0C 1PO
Toll Free: 855-300-9151
Canada
Website:
USA Office
11451 Belcher Road South
Largo
Tel: 315-788-9500
FL 33773
Toll Free: 888-473-9546
USA
Website:
PULSAR MEASUREMENT CONTACT DETAILS
Check the cable & enclosure are intact; splits or cracks
render the equipment unsafe; remove it from service.
There are no user-serviceable parts.
Remove power before installation or decommissioning.
Dispose of the transducer and cable in accordance with
regional environmental regulations for electronic equipment.
e.g. WEEE regulations within the EU, directive 2012/19/EU.
MAINTENANCE & DISPOSAL
EU DECLARATION OF CONFORMITY
