ZM1.WALL
Wall Mounting Bracket
Oct. 2007 / Rev. 1.2 DS-ZM1.WALL-EN / All parameters are specified at 25°C ambient unless otherwise noted.
The information presented in this document is believed to be accurate and reliable and may change without notice.
www.pulspower.com Phone +49 89 9278 0 Germany
2/2
4. A
SSEMBLY AND
M
OUNTING
I
NSTRUCTIONS
Fig. 4-1
Detaching DIN-Rail brackets
Fig. 4-2
Detach slide
Fig. 4-3
Mounting steel brackets
Detach the two aluminium
brackets by removing the four
screws with a Torx screwdriver
(Torx 10). Save the screws for
step 3.
Remove the plastic lock
mechanism by using a flat-blade
screwdriver to move the lock
downwards while at the same
time push the plastic slide
upwards. Detach the plastic slide.
Mount the two steel brackets with
the same screws from the DIN-Rail
brackets using caution not to
over-tighten the screws!
Recommended tightening torque
is 0.6Nm. (5.3lb.in).
5. P
HYSICAL
D
IMENSIONS AND
W
EIGHT
Weight
25g / 0.06lb each
50g / 0.11lb for one set
Electronic files with mechanical data can be downloaded at www.pulspower.com
Fig. 5-1
Dimensions
