PIM60.245
Feb. 2022 / Rev. 2.0 DS-PIM60.125-EN
www.pulspower.com
1 / 17
All parameters are specified at 24V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
P
OWER SUPPLY
1AC 24V 60W
•
AC 100-240V Wide-range input
•
NEC CLASS 2 compliant
•
Cost optimized without compromising quality or
reliability
•
Width only 36mm
•
Efficiency up to 91.8%
•
Low no-load power losses
•
Full power between -10°C and +60°C
•
Large Screw terminals
•
3 Year warranty
P
RODUCT DESCRIPTION
S
HORT-FORM DATA
The PIM60.245 is a DIN rail mountable single-phase-
input power supply, which provides a floating,
stabilized and galvanically separated SELV/PELV/ES1
output voltage. The output fulfils the requirements
for a limited power source according to NEC CLASS 2.
The device is equipped with Screw terminals, which
are optimized for large wire sizes.
The mechanically robust housing is made of a high-
grade, reinforced molded material, which permits
surrounding temperatures up to +70°C.
The PIANO family is a compact industrial grade DIN rail
power supply series that focuses on the essential
features needed in today’s industrial applications. The
excellent cost/performance ratio does not compromise
quality or reliability.
Output voltage
DC 24V
Nominal
Adjustment range 24-28V
Factory setting 24.1V
Output current
2.5-2.1A
Below +60°C ambient
1.9-1.6A
At +70°C ambient
Derate b60°C and +70°C
Input voltage AC
AC 100-240V
±
10%
Mains frequency
50-60Hz
±
6%
Input current AC
1 / 0.6A
At 120 / 230Vac
Power factor
0.55 / 0.47
At 120 / 230Vac
Input inrush
current
15 / 36A
peak
At 120 / 230Vac, +40°C,
cold start
Efficiency
90.7 / 91.8%
At 120 / 230Vac
Power losses
6.2 / 5.4W
At 120 / 230Vac
Hold-up time
24 / 113ms
At 120 / 230Vac
Temperature
range
-10°C to +70°C
Size (w x h x d)
36x90x91mm
Without DIN rail
Weight
235g / 0.5lb
O
RDER NUMBERS
M
AIN APPROVALS
Description:
Power supply PIM60.245-xx
Order Number:
PIM60.245
For details and the complete approval list, see chapter 18.
Ind. Cont. Eq.
