22
Ⅲ
. Uses and Operations
9. Precautions for Non-Professional Users
Be fully prepared with knowledge about PULLEY-MAN before operation in order to prevent accidents.
Read this manual carefully before operation and conduct a trial operation without load at a safe place
until accustomed to it, following instructions in this manual regarding safety guidelines. Best way would
be to conduct the operation under supervision of maintenance personnel or a knowledgeable person.
◈
Precautions in using PULLEY-MAN as Winch
❶
When pulling load, make sure that wire rope is in straight line with pulle groove.
❷
When pulling load, do not allow any intermediate obstacle between pulley and load that gives angle
on wire rope. (It may damage or break wire rope)
❸
Make sure no person or object is at front or rear of moving load.
❹
Do not change revolving direction of in-put power source abruptly.
❺
Do not step on loose wire rope during operation.
❻
Keep loose wire rope untangled with in-put power cable.
❼
Keep loose wire rope that just passed pulley away from load being lifted.
❽
When road surface on which load is being pulled is uneven or has depression or pit, use a plate to
make the path even.
Ex) When there is a ditch, stairs or elevation on ground, or when pulling load onto power tractor, etc
❾
When pulling load on a slant surface and load loses balance, take a safety measure to prevent load
from slipping down.
❿
Do not stop operation while pulling load on slant surface without any control or safely measures
Do not ride on moving load.
Do not use PULLEY-MAN for passenger purpose without permission of manufacturer.
Observe other related laws or rules regarding safety.
8. PULLEY-MAN used as a Winch
◈
PULLEY-MAN can function as a winch by moving load horizontally or in slant angle.
◈
Pulling capacity varies by load weight and inclination of wire rope. Refer to table below for maximum capacity at
given condition and inclination.
◈
Set-up modes of PULLEY-MAN used as a hoist are the same as when used as a winch. Choose a mode that best
suits the working condition.
