Installation:
1-Install the plastic formwork trimmed to the wall (A) and positioning the corrugated pipe in the hole of the formwork.
2-Connect the power cable according to the appropriate side : Line ,Neutral ,Earth (E)
3 - Place the appareil into the formwork
CAUTION: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the
eye.The replacement must be done by a qualified electrician.
Recommendations
1) verify that the equipment used to connect our devices to enjoy all the guarantees required under European law;
2) use the cables, connectors and quality materials for electrical wiring;
3) Products with IP65/68 degree make the wiring / connections with accessories provide the same degree IP of the selected product
(available in the catalog);
4) In the case of installations outside is not recommended to install the power supplies in the formwork and / or in the junction box
without adequate protection;
COD. 502016
COD. 502017
HYDROSTEP LINEAR 06 LED
-Power consumption : 7W
-Voltage :220-240V 50-60Hz
-Color Temperature : 3000K
-Beam angle : 100°
-Insulation class: I
-IP protection: IP65
-Gross weight: 1kg
HYDROSTEP LINEAR 05 LED
-Power consumption : 7W
-Voltage :220-240V 50-60Hz
-Color Temperature : 3000K
-Beam angle : 100°
-Insulation class: I
-IP protection: IP65
-Gross weight: 1,05kg
COD. 502020
HYDROSTEP LINEAR 07 LED
-Power consumption : 10,5W
-Voltage :220-240V 50-60Hz
-Color Temperature : 3000K
-Beam angle : ASYM 120°
-Insulation class: I
-IP protection: IP65
-Gross weight: 1.5kg
-IK10
HYDROSTEP LINEAR 07
