LED SMT Reflow Oven T-960W
http://www.tech168.cn
9
not very completely, suggest you adjust then reflow again. Usually this cannot damage
the components.
8. From low to high when set temperature. If the heat range is over the reflow
temperature too high, should increase the transmission speed or reduce the set
temperature. The detailed operation is opposite to step 4.
Equipment Installation
1. Set up field.
1.1
. Please do the work in the clean environment condition.
1.2.
Do not put the machine near the electromagnetism interfering resource.
1.3.
Do not put the oven exits and entrances face towards to the fan and the window.
2. Power supply
Please use five-wire system380V. Ensure the machine contacts the earth well and
requested professional electrician operation.
3. Adjust the reflow oven height.
By adjust the machine leg to adjust the height. The way is follow: use industrial or
alcohol gradienter to measure. Then adjust the machine leg to adjust the dryer on all
sides till it is completely horizontal.
4. Caution:
4.1.
The working environment should be clean. So the welder quality is good.
4.2.
Do not use and store the machine out of door, high temperature and humid
condition.
4.3.
During operation take care of the high temperature, avoid scald.