Pudu BellaBot BL100 User Manual Download Page 3

26

26

27

28

28

28

29

29

29

30

31

31

31

31

32

33

34-38

Service functions

Map settings

Voice settings

Speed settings

LED dot-matrix setting

Version upgrade

Advanced settings

Music function

Music playlist

Music import

Parking instructions

Instructions on voice interaction

Instructions on touch interaction

Product Maintenance

Troubleshooting

After-sales Service

Trays, drive wheel and auxiliary wheel

Sensors maintenance

Robot body maintenance

Handling of robot

Sign maintenance

1. DO NOT place any item with weight over the load of the tray: 10kg/tray(standard),
5kg/tray(obturated)
2.  Click Finish to deliver the next task immediately, please take the food before clicking 
Finish.
3. Do NOT pick up and drop the food when the robot is moving, if necessary, please click 
the screen to pause the robot, and then pick and drop the food.The pause time of cruise 
mode is 20s, and the pause time of other modes is 10s, after the pause, the robot will 
resume walking automatically.
4. DO NOT press hard on the screen or tap the screen.
5. DO NOT pull the robot during operation.
6. DO NOT push the robot backwards while the robot is powered on.
7. If the robot enters the wrong position due to factors such as blockage, please pause the 
task and push it to the correct route to continue the task.
8. In the event of a collision, please cancel the current task or pause, re-enter the task, DO 
NOT artificially block the robot.
9. In the absence of special custom-made trays, it is not recommended in principle to 
deliver soup with PuduBot.When using, be sure to prevent the soup from being splashed 
and being scalded by the hot water.
10. Pay attention to the change of state of the robot during its travel, please avoid the 
robot when it is carrying hot tableware or soup pot to prevent collision with the robot and 
high temperature burns.
11. The top camera is used for precise positioning of the robot, DO NOT block it with a 
cover during starting and running.
12. DO NOT tap or make other actions to the robot, otherwise it may easily cause
equipment damage.

Instructions for use

Safety Instruction

28

28

29

29

30

30

31

31

31

32

32

33

34

34

34

34

34

35

36-40

3

4

Summary of Contents for BellaBot BL100






















Reviews: