6.Bluetooth Pairing
After pairing with a Bluetooth device, you can use the omnidirectional
microphone to make audio calls. Pair the bluetooth device with the
omnidirectional microphone.
Steps are as follows：
（1）Press“ ”，Y-type Bluetooth indicator flashes green.At this point,
the omnidirectional microphone enters bluetooth pairing mode.
（2）Put the mobile device in the Bluetooth device search mode and
select "PUAS", The green light is always on after bluetooth connection.
At this point, you can use the omnidirectional microphone to make
audio calls.
Note: When Bluetooth matching fails, Bluetooth needs to be turned on again.
- 7 -
- 8 -
7. LED Status Display
Working
status light
Blue LED
USB Connect
Lync Connect
Red LED
Mic Mute
Volume indicator
Green light
The higher the volume, the more
lights
Red light
Speaker Mute
Bluetooth /Power
Indicatior Light
Y-type Bluetooth
indicator
1."Turn On"
Bluetooth,
Green light flashes;
2."Bluetooth Connection",
Green light ON
Power Indicatior
Light
NO Status
8. Preset Setting
● Save Preset
Adjust the camera to the position that needs to be preset, press "Preset"
Key for 5 seconds, the corresponding preset is set successfully.
(Note: 10 presets (0-9) can be set through the remote control, and 3
presets (1-3) can be set through the omnidirectional microphone and
processing function of video software (e.g. turning off auto gain,Echo
cancellation, noise cancellation, etc.)
4.Use high quality speech coding.
Summary of Contents for U51VC
Page 1: ......
