TSC6
4
PTN Electronics Limited
www.PTN-interface.com
3. Installation method
Step1
：
To cut an opening in the table
：
Cut out at opening in your table according to the cutout template
，
SIZE:
Step2
：
Adjust the height of the connecting surface
：
Remove the height adjustment screws, while
supporting the surface from underneath with your fingers
；
Use your fingers to bring the Connecting
Surface to the required height, screw and tighten it in place using the height adjustment screws.
Step3
：
Insert the unit
：
Carefully insert the unit into the prepared opening
Depth
adjustment
holes
