4K HDBaseT
TM
Repeater
PTN Electronics Limited 8 www.PTN-electronics.com
4.2.2 Basic Settings
Double-click the software icon to run RS232 Control Software.
Here we take the software
CommWatch.exe
as example. The icon is showed as below:
The interface of the control software is showed as below:
Please set the parameters of COM number, bound rate, data bit, stop bit and the parity
bit correctly, and then
tick the “Hex Send Mode”, you are able to send command in
Command Sending Area.
Baud rate: support 2400
、
4800
、
9600
、
19200
、
38400
、
57600
、
115200;
Data bit: 8;
Stop bit: 1;
Parity bit: none.
Parameter Configuration area
Monitoring area, indicates if the
command sent works.
Command Sending area
