HDBaseT Pro Extender
PTN Electronics Limited 2 www.PTN-electronics.com
contact with the dealers.
2. Introduction of Product Appearance
2.1 Product Appearance of TPHD403PT
Figure 1 Interfaces of TPHD403PT
No.
Name
Description
①
On
Link
In
Power
On: Used to show the working status, blinks when in normal
working state, turns off when stop working.
Link: Twisted Pair Link status indicator. It will keep on when
connection is successful.
In: When connected with
a
device which supports HDCP and
works normally, it will keep on. If the device does not support
HDCP, it will blink.
Pow
er: Illuminate red when powered on.
②
ETHERNET
Ethenet ports, when need to work in a LAN, one of these 4 ports
(both the Ethernet ports of TPHD403PT and TPHD403PR)
should be used for internet access, and the others can be
connected with computers. If they are well connected, the yellow
LED indicators on the corresponding ports will keep blink and
the green ones will keep on when working.
③
HDBT OUT
Connect with the HDBT IN port of TPHD403PR via a single
CAT5e cable (90m length in max).
④
HDMI IN
HDMI input port, connect with an HDMI source device.
⑤
IR IN&OUT
IN: Connect with IR receiver, the IR signal received from this
port can only send out in TPHD403PR.
OUT: Connect with IR Emitter, and the sending IR signal is
received from TPHD403PR.
⑥
RS232
Serial port, 3p captive screw connector, connect with the control
terminal to control the controlled terminal, supports bi-directional
RS232 control between the transmitter (TPHD403PT) and the
receiver (TPHD403PR).
⑦
DC 24V
Connect with a DC 24V power adapter. (Not necessary if
TPHD403PR connects with power adapter)
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
