4K HDBaseT 4x4 Matrix Switcher
PTN Electronics Limited
1
u
r
.
x
o
b
-
v
a
.
w
w
w
1
Example: Check which one is the corresponding input for output 2. (Presume Output 2
corresponds to Input 1.)
Operation: Press Output 2 button, LCD screen display
“AV: 1->2 IR: 1->2”, and
indicators of input 1 and output 2 turn on and last for 3 seconds. Then output 2
corresponds to input 1.
4.1.4 Clear operation
When you switch output channel, learn EDID data, or set EDID data, press
Clear
button
to withdraw the operation before you press
“
ENTER
” to carry it on. When you press it,
the matrix will return to the previous status.
4.2 IR Control
By using IR & HDBaseT transmission technology, the MUH44TPR2-N has some
functions as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the MUH44TPR2-N locally/remotely.
4.2.1 Usage of IR Remote
①
Standby button, press it to enter/ exit standby
mode
②
Input channels, range from 1~4 (buttons 5~8 are
not available), corresponding IR signal switched
synchronously when switching input channels.
③
Menu buttons,
ALL
,
EDID
and
CLEAR
, same
with the corresponding front panel buttons.
Please refer to
4.1 Front Panel Button Control
for
details.
④
: Navigation buttons.
ENTER: Confirm button.
⑤
OUTPUTS (buttons 5~8 are not available)
In normal mode: output channel selection
buttons, each channel has 1 IR IN, 1 HDBaseT, 1
RS232, and 1 AUDIO outputs, and channel 1~4
have HDMI outputs.
In EDID invoking mode: press button 1/2 to
switch among the 5 embedded EDID data
Note:
With this IR remote, MUH44TPR2-N can be controlled by the built-in IR, the
extended IR receiver connected to the
“IR EYE”/”IR ALL IN” and the IR receiver on the
far-end receiver.