HDMI Matrix Switcher 32x32
PTN Electronics Limited
4
www.PTN-electronics.com
corresponding output channels
Example: To transfer the signals from input channel No. 3 to their
corresponding output channels
Operation: Press buttons in this order “3”, “THROUGH”
UNDO
Undo button: To resume to the status before the command just
performed
Backspace button: To backspace the latest input button.
Switching Operation
:
With the front control panel, the switcher could be control directly and rapidly by
pressing the buttons under below format.
“Input C”Switch Mode”+”Output C”Enter”
1)
“Switch Mode”: “AV”.
2)
“Input Channel”: Fill with the number of input channel to be controlled
.
3)
“Output Channel”: Fill with the number of output channels to be control.
4)
The input/output channels on the rear panel are counting from left to right, top to
bottom. If the input/output channel is two digits number, the input delay time between
two numbers must less than 5 seconds; otherwise the operation will be cancelled.
4.2. Usage of the IR Remote
With the infrared IR remote, the matrix switcher could be control remotely. As the
function buttons on the IR remote are the same with the ones on the front control panel,
the IR remote shares the same operations and commands with the control panel.
Please press the buttons in this order:
Input channel
->
Menu
->
Output Channel