DVI /Audio Matrix Switcher 4x4
PTN Electronics Limited
13
www.PTN-electronics.com
10. Safety Operation Guide
In order to guarantee the reliable operation of the equipments and safety of the staff,
please abide by the following proceeding in installation, using and maintenance:
1)
The system must be earthed properly. Please do not use two blades plugs and
ensure the alternating power supply ranged from 100v to 240v and from 50Hz to
60Hz.
2)
Do not put the switcher in a place of too hot or too cold.
3)
As the power generating heat when running, the working environment should be
maintained fine ventilation, in case of damage caused by overheat.
4)
Please cut off the general power switch in humid weather or left unused for long
time.
5)
Before following operation, ensure that the alternating current wire is pull out of the
power supply
:
Take off or reship any components of the equipment.
Take off or rejoin any pin or other link of the equipment.
6)
As to non-professional or without permission, please DO NOT try to open the
casing of the equipment, DO NOT repair it on your own, in case of accident or
increasing the damage of the equipment.
7)
DO NOT splash any chemistry substance or liquid in the equipment or around.
