Press the “Mode / Standby” button repeatedly to switch to DAB mode.
The DAB mode will automatically be selected and the first time the radio is connected to the
supply the radio will perform a quick scan. The display will show ‘Scanning’ a slide bar that
indicates the progress of the scan, the name of the last station found and the total number of
stations found so far.
When the scan is finished the radio will play the first alphanumerically found station. If the radio
does not find any stations, ‘AUTO SCAN NOW’ displayed. Press Enter to scan again.
To listen to all stations that have been stored use the Prev and Next button to scroll through them.
Press the “Enter” button when on the required station.
The radio will display station information when you press the ‘Info/Menu’ button. Press multiple
times to view all information available.
When you turn on the radio again after it switching off, it will automatically tune to the same station
(DAB or FM) that was last selected.
Remarks :
In DAB mode, the radio will synchronize with the time and date of the station.
Station information for DAB Radio
Signal Strength : Displays a signal bar with the strength of the current station.
PTY (Programme Type) : shows the type and description of the program provided by the DAB
station.
Station name : Shows station name
Channel and Frequency : Displays the station’s transmission channel number and frequency.
Signal Error : Provides details of the signal error rate.
Bit Rate : The date rate which the signal is being transmitted.
Time : Shows the hour/min/sec
Date: shows DD/MM/YEAR
How to store a preset station
Up to 20 stations can be set. To store a station that you are currently playing :
Press and hold ‘1’ or ‘ 2 ‘ button. ’Empty’ will show on the display, press Enter, the display will then
show ‘Preset # Stored’.
Press and hold ‘3+’ button, press ‘Prev’ or ‘Next’ button to select the number (1-20) you want to
store the station as. Then press the “Enter” button to save. The display will then show ‘Stored’.
How to recall a preset radio station
Press the ‘1’ or ‘2 ‘ button into preset 1 or preset 2 to play the stored station.
Press ‘3+’ button, and press the ‘Prev’ or ‘Next’ button to scroll through your preset stations. Press
“Enter” button to confirm.
Menu
Press and hold the ‘Menu/info’ button to step into setting surface
Auto scan now
Select ‘Auto scan now’ by pressing “Enter” button to start scanning.
Manual Scan
Select ‘Manual Scan’ by pressing “Enter” button to choose from 5A 174.928mhz to 13F