IMPORTANT SAFETY INFORMATION
7. Work Safe. When wearing gloves to operate the tool, make sure that the gloves do
not interfere with operating the Trigger. Test your gloves with the Trigger before
attaching the unit to an air source. Keep your finger away from the Trigger until you
are ready to work. Never start the tool unless you have a firm grip with both hands
and you are positioned at your work piece or area. Before using the tool, know what
is directly underneath the work area or work piece. The tool can quickly penetrate
material. If working directly on the ground, make sure you are not directly above
shallow cables, lines, or pipes. Keep your limbs and body clear of the tool. If an
accessory or attachment breaks off, the tool tends to surge forward suddenly.
Operate tool a safe distance from yourself and others in the work area. Make sure the
immediate area is clear of other people or animals. Spectators must stay at a safe
distance. Never point the tool or the air hose (not included) at anyone. Keep proper
footing and balance at all times. Do not reach over or across running machines,
hoses, etc.
8. Do not operate any tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate any tool.
9. Be sure air is in OFF position when connecting tool to air supply.
10. Use only those accessories that are designed for use with tools. For example, with
impact wrenches do not use ordinary sockets. Use impact sockets for all air tools.
11. Be sure to disconnect tool from air supply before changing accessories, performing
service on tool and when not in use.
12. Follow air source manufacturers' directions for connection of regulators, filters, and
other accessories to air source. Do not install quick couplers directly on tool as they
put unnecessary strain on the air inlet threads possibly causing them to wear out
prematurely. Instead, install them on a short length of air hose attached to the tool.
13. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
14. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician using original PERFORMANCE TOOLS® replacement parts.
Failure to do so can lead to accidents for the operator. Use of any other parts will
void the warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Performance Tool®. Use only accessories that are
recommended by the manufacturer for your model. Accessories that may be suitable
for one tool may become hazardous when used on another tool.
WARNING:
Repetitive motions or exposure to vibration may be harmful to your hands and arms.
WARNING:
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this product, but
must be supplied by the operator. Read and understand all of the instructions provided in the
instruction manual of this product, as well as, any other tool (s) used with this product.
3
6
PARTS LIST
INDEX DESCRIPTION
QTY INDEX DESCRIPTION
QTY
1
Air Inlet
1
2
Screw
7
3
Rear Cover
1
4
Spring
1
5
O-Ring
2
6
Valve Stem
1
7
Valve Plug
1
8
Valve Collar
1
9
Oil Cotton
4
10
Oil Cotton
1
11
Gasket
1
12
Flat Gear
4
13
Rivet
4
14
Piston
2
15
Piston Ring
4
16
Cylinder
2
17
Screw
4
18
Spring Pin
1
19
Trigger
1
20
Handle
1
21
Screw
2
22
Plug
1
23
O-Ring
1
24
Pin
1
25
Switch
1
26
Palm Handle
1
27
Housing
1
28
Front Cover
1
29
Wire Clip
7
30
Rivet
1
31
Compression Spacer
1
32
Fixed Plate
2
33
Screw
1
34
Foam Pad
1
35
Pad Plate
1
36
Rivet
4
37
Rivet
1
38
Pad Boat
1
39
Locking Nut
4
40
Slide Gear
4
41
Brass Plate
2
42
Screw
4
43
Transmission Gear
2
44
Gear Shaft
4
45
Switch Gear
1
46
Switch Sleeve
1
47
Boat Guide
1
48
Screw
2
49
Screw
1
50
Rivet
1
51
Plug
1
52
Needle Bearing
1
53
Front Gasket
1
