PT AMC123, User Manual

Page: 41 / 104

Switches
41
Switches
The AMC123 includes several options that tailor the operation of the module. Most of the
options are selected through software, however some options cannot be software controlled
and are configured with dual in-line package (DIP) switches. Closing or opening the desired
switch sets each option.
Switch Locations
The AMC123 includes the following DIP switches, shown in Figure 3-3, “AMC123 Switch
Location,” below.
• “Push-Button Reset Switch (SW1),” on page 42
• “CMOS Reset, FCLKA, SSC, and COM1 Redirection Switch (SW2),” on page 42
• “BIOS Configuration Switch (SW3),” on page 43
• “SATA, Ethernet, USB, and JTAG Configuration Switch (SW4),” on page 44
• “Hot-Swap Switch (SW5),” on page 44
Figure 3-3: AMC123 Switch Location
SW1 - Push-Button
Reset Switch
SW5 - Hot-Swap Switch
SW3 - BIOS Configuration
Switch
SW2 - CMOS Reset, FCLKA,
SCC, and COM1 Redirection Switch
SW4 - SATA, Ethernet, USB,
and JTAG Configuration Switch