EN 388: 2016
Mechanical risks EN 388: 2016
Abrasion resistance - 4 (1-4)
Cut resistance - 2 (1-5)
Tearing strenth - 4 (1-4)
Puncture resistance- 4 (1-4)
Cut resistance (TDM)- X (A-F)
X means NOT TESTED
Use and care
Carefully inspect the gloves before you put them on. Look for cracks, tears, holes, swelling or other
damage. If you spot any damage, discard the gloves. Clean the outside of your gloves after every use.
Dirty gloves should be cleaned with a cloth or a soft brush. It is forbidden to use flammable
detergents and chemical detergents.
Wet gloves should get dry at room temperature. Put your gloves
in the proper container when you are finished with your task for the day.
Packaging and storage
The gloves are packed into plastic bags. Each bag contains 12 pairs and than cartons. The gloves
should be stored in a dry and cool place and should not be exposed to direct sunlight. If you follow
the recommendations of storage, the gloves are useful for 3 years from the date of purchase.
Comments
There were not found
substances in the materials used for the production of the gloves affecting the
health and life of the user.However, if you notice any allergic reaction, please consult a doctor. The
gloves should not be worn when there is a risk of being caught by moving machine parts. The
protection is limited to part of the hand. The Gloves provide protection only against the hazards
mentioned in this instruction for use. It is recommended to check the gloves visually before each use.
Damaged gloves (abrasions, tears, or rips) should be immediately withdrawn from use.
Disposal
Dispose in accordance with the regulations being in force in your country
.
Declaration of conformity is to find:
https://www.pswprotech.pl/rigger-gloves/psw-7175-nr-rekawice-robocze-multan/
Notified body: ITT CERTEX Sp.z o o. Górnicza street 30/36, 91-765 Łódż, Poland (no. 2534).
EC Type-Examination Certificate No. ITT. 72.14.6.3.202.PPE.2534
