PSV groupe DRC114, User Manual

Page: 11 / 28

11
2/
5 ELEMENTS CUTTING SYSTEM (UNGER).
NOTE : DISCONNECT THE MACHINE OF THE ELECTRICAL RETE FOR THE
FOLLOWING OPERATIONS :
A- insert the helix (2) inside the body (1) with a slight twisting motion for a good
engagement with the hex output shaft engine.
B- mount the plate/knife (3).
C- mount the knife (4).
D- mount the plate (5).
E- mount the knife (6).
F- mount the plate (7).
G- mount the ring (8).
H- mount the nut (9).
IMPORTANT :

The mounting must be done in the order announced.

Do not mount the both body / helix and the cutting system in one time.

The mounting must be done following the steps.