PST PST-UM-2010-EN-02, User Manual

Page: 10 / 22

Minox i Oxygen Transmitter User Manual
4 ProcessSensing.com
2 Installation
Before installing your Minox i oxygen transmitter, ensure that its specifications are suitable for
the process or pipeline where it will be installed.
See "2.2.1 KF-40 flange and tri-clamp process connections with dimensions" on page 5 or "2.2.2
Flow-through process connection with dimensions" on page 6 for more guidance.
This product is not approved for use in applications where the sample gas is greater than
21 % volume O
2
.
2.1 Unpack the Minox i
NOTE The sensor is packed in a low O2 environment to preserve shelf life. It should not be
removed from its bag until you are ready to use it.
Your Minox i oxygen transmitter pack is comprised of the following equipment:
1. Minox i oxygen transmitter
2. Electrochemical or solid-state oxygen sensor
3. A MagTip calibration tool
4. Certificate of calibration
5. Cable fitted with M12 connector.
Figure 3. Contents of Minox i package
Leaving a sensor in ambient air conditions will reduce sensor life.
1 2
3
4
5