4
4
4
4
Operating Elements and Connections
No.
Element
Function
1
Status indicators CH 1-4
• PROTECT: protective circuit is active
• CLIP: overload
• SIGNAL: input signal is present
• -5 dB, -10 dB, -20 dB: input level indication
• ON: power indication
2
Level controls CH 1-4
There are four independent level controls available. In bridge mode, the level
controls of CH 2 and CH 4 are deactivated. The volume is adjusted with the
controls of CH 1 and CH 3.
3
Power switch
The power switch turns the amplifier on and off.
4
Power input
The amplifier has an internal power supply that will accept voltages ranging
from 100-240 V at frequencies from 50-60 Hz. A power cord is included.
5
Speaker outputs CH 1-4
The output section of the amplifier offers four Speaker output connectors. In
bridge mode only outputs CH 1 and CH 3 are used.
6
Input jacks with feed-through
outputs CH 1-4
The input section of the amplifier offers four electronically balanced XLR
connectors with feed-through outputs. The input sensitivity can be adjusted.
7
SENSITIVITY selector
Selects the input sensitivity.
8
MODE selector
Selects the operating mode stereo, parallel or bridge.
21
