Psion 2739D-7545MBW, User Manual

Page: 104 / 280

Chapter 4: Configuration
Advanced
Psion Omnii Hand-Held Computer User Manual
90
Internal super-capacitors will protect the data stored in the computer while the battery is swapped for a
fully charged one.
4.20.4 Advanced
• In the Power Properties dialog box, open the Advanced tab.
Allow Suspend With
This menu allows you to specify whether or not your unit will enter Suspend Mode while it is operating with
an active PPP connection, network interface or active TCP/IP connection.
Low Power Warnings
The sliding scale at the bottom of this menu allows you to specify the remaining battery capacity at which a
warning message is displayed on the Omnii screen, from 0% to 20%.
4.20.5 Built-in Devices
• In the Power Properties dialog box, open the Built-in Devices tab.
WWAN Power Mode
This menu allows you to enable power to your WWAN radio, and whether or not the radio will turn off when
the Omnii enters Suspend Mode. To configure the radio, please refer to Appendix G: “Wireless Wide Area
Network (WWAN) Settings”.
4.20.6 Battery Health
The Battery Health service provides an estimate of battery health based on a number of different measure-
ments, beyond just capacity.
Important: Once the battery is removed, the super-capacitors will preserve the data stored on
the Omnii for approximately 4 minutes. It is critical that you install a charged
battery before this time elapses.