background image

Tighten the screws to a torque of 2 lbs-in (2 kgf-cm).

Figure 4  CF Card Stopper Installed

Slide the SW1401 switch to the right to turn power back on.

Replace the end-cap, and tighten the four Philips screws to a torque of 3 lbs-in (3 kgf-cm).

Install the battery, and replace the battery cover.

Connecting To A LAN Using An 802.11b Radio

Once the 802.11b radio is installed in the WORKABOUT PRO, you’ll need to take a few steps to config-
ure the radio. For detailed instructions, please refer to the 

WORKABOUT PRO Hand-Held Computer 

User Manual

.

Document Declaration WEP128 Encryption Notice

The radios on this order contain cryptographic capability.

Under Canadian federal regulations regarding the exportation of cryptographic products, as listed in Canada's Export Controls, 

Category 1150 - Information Security, you are hereby informed that: 

• Radios with 

128 bit encryption

 can not be distributed to any end user, whether civil, military or otherwise, directly or 

indirectly involved in the research, development or production of chemical, biological or nuclear weapons, on any 
missile programs. 

• Radios with 

128 bit encryption

 may not be exported to the following countries:

Afghanistan, Angola, Cuba, North Korea, Eritrea, Federal Republic of Yugoslavia (Serbia and Montenegro), Iran, Iraq, 

Liberia, Libya, Myanmar (Burma), Rwanda, Sierra Leone, Syria, and Sudan.

Declaration Of Conformity For CF Radio Card Model # RA2016

Model Description and No.:

Wireless CF Card - WLF010 (Psion Teklogix model # RA2016)

Document No.:

ASK03051905

Report No. and Date of EMC:

RM920327R01, Apr. 25, 2003

Report No. and Date of RF:

RE920327R01, Apr. 21, 2003

Report No. and Date of LVD:

ASK030402, Apr. 08, 2003

Application of Council Directives:

EMC Directive: 89/336/EEC
Low Voltage Directive: 73/23/EEC
Amendment Directive 93/68/EEC
R&TTE Directive 1999/5/EC

Tested for compliance with: 

EN 55022/1998 +A1/2000

: LAN/Telecom Port Emission Standard

EN 61000-4-2/1995 +A1/1998+A2/2000 : Electrostatic Discharge requirements
EN 61000-4-3/1995 +A1/1998+A2/2000 : Radiated Electromagnetic Field requirements
EN 60950 : 2000
EN 300 328-1/2001-12
EN 300 328-2/2001-12
EN 301 489-17/2002-08
FCC Guidelines for Human Exposure

: RF Exposure Report

Manufacturer:

Askey Computer Corp.
10th Floor, No. 119, Chienkang Rd., Chung-Ho
TAIPEI, TAIWAN, R.O.C.

CF Card Stopper

COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE

Psion Teklogix Inc.

2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9
Tel: +1 905 813 9900

Fax: +1 905 812 6300

E-mail: [email protected]

Reviews: