Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
109
Chapter 6: Connecting To A LAN With 802.11b
Installing The 802.11b Radio
6.1 Installing The 802.11b Radio
The WORKABOUT PRO operates with an 802.11b Direct Sequence Spread
Spectrum radio. The CF (Compact Flash) card is easily installed in the unit.
•
To begin, remove the battery pack. If your unit is using AC power,
disconnect it.
•
Remove the stylus from the end-cap before removing the end-cap itself.
•
Remove the end-cap at the top of the WORKABOUT PRO – unscrew the
four Philips head screws from the cap.
Figure 6.1 The End-Cap And The SW1401 Power Switch
SW1401 Power Switch
End-Cap
