WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual
49
Chapter 3: Getting To Know Your WORKABOUT PRO
Pairing A Bluetooth Headset Or Other Bluetooth Device
3.9.1 Pairing A Bluetooth Headset Or Other Bluetooth Device
Note:
If the
Bluetooth
radio is not already enabled, tap on the Power icon in the
Control Panel, tap on the Devices tab and enable the
Bluetooth
radio.
To pair a headset:
•
Follow the headset manufacturer’s instructions to place the headset you
want to place in pairing mode.
•
In the
Control Panel
, tap on the
Bluetooth
icon choose the
Devices
tab and
Scan for devices in your area. (Note that if you’re pairing the device for the
first time, the device scan occurs automatically; you do not need to tap on
the
Scan
button to perform a scan.)
When the scan is complete, a list of devices is listed.
•
Double-click on
headset
you want to pair with. If you prefer, you can high-
light
headset
and tap on the
Services
button.
A dialog box appears requesting that you enter a PIN number.
•
Type your
pin number
and tap on
OK
.
A Services dialog box appears listing
headset
.
•
Press and hold the stylus on
headset
. In the pop-up menu, choose
Active
.
Your headset is now paired. A COM/BSP port name will now appear beside the
service for this device. An asterisk will appear under the
Active
list in the Service
screen.
3.10 Inserting The SD/MMC Card And SIM Card
There are two slots available in the battery compartment – the lower slot is provided
for a SD/MMC (Secure Digital/Multi-Media Card) and the upper slot is for a SIM
(Subscriber Identity Module) card.
SD/MMC cards provide additional non-volatile memory to your hand-held. SIM
cards allow access to the hand-held
Voice
option, access the Internet, and so on.
3.10.1 Inserting The Card
•
Switch off the WORKABOUT PRO.
•
Remove the battery cover and the battery.
A hinged door at the top of the battery compartment protects the connectors. It is
hinged on the left side.
•
Pull the hinged SD door down as the arrow icon on the door indicates.
