Psion Teklogix WA4204-G2, User Manual, Page: 16 / 24

Psion Teklogix WAPro Multi-Dock User Manual 8
5.0 troubleshooting
5.1 power leD Does not light up
Remove handheld, and unplug the Multi-Dock. •
Connect another device to the mains outlet to ensure there •
is power.
Remove the IEC mains power cable from the Multi-Dock, •
and check it for damage.
Reconnect the Multi-Dock mains cable and mains outlet. •
If the power LED still does not light up, the Multi-Dock •
requires service.
5.2 no Charge leD on the handheld Computer When
installed in the Multi-Dock
Remove the handheld, and carefully clean the contacts on •
the bottom of the handheld with soapy water or alcohol.
If necessary, also clean the tops of the mating pogo pins on •
the Multi-Dock - taking care not to bend or damage them.
5.3 no green link leD (rJ45) Connector When
Connected to a network
Check the Ethernet cable. Replace if the cable is suspect. •
Contact your network administrator. •