Psion Teklogix Vehicle-Mount Computer 8515 User Manual Download

Page: 25 / 190

Chapter : Approvals and Safety Summary

Psion Teklogix 8515 Vehicle-Mount Computer User Manual

xxi

•

Do not operate the vehicle-mount computer with a damaged cord or plug.

Replace immediately.

•

Make sure the cord is positioned so that it is not stepped on, tripped over or otherwise

subjected to damage or stress.

•

An extension cord should not be used unless absolutely necessary. Use of an improper

extension cord could result in fire or electric shock.

•

To reduce risk of electric shock, unplug the vehicle-mount computer from the DC

source before attempting any maintenance or cleaning.

Warning: Physically disconnect the 8515 from the vehicle battery during battery

charging (into AC outlet).

Summary of Contents for Vehicle-Mount Computer 8515































































































































































































Search results

Summary of Contents for Vehicle-Mount Computer 8515

Reviews:

Related manuals for Vehicle-Mount Computer 8515

Brands by name

Popular brands

Psion Teklogix Vehicle-Mount Computer 8515, User Manual

Search results

Summary of Contents for Vehicle-Mount Computer 8515

Reviews:

Related manuals for Vehicle-Mount Computer 8515

Brands by name

Popular brands