Psion Teklogix PX3004 User Manual;
4
3. PX3004 Operation
3.1 Docking The NEO Terminal
Insert the Power Adapter Mini Fit Jr plug into the PX3004 rear DC
input receptacle. The PX3004 Power LED and Power Adapter LED will
glow green when powered from the mains. (See figure 3.1, page 5). The
PX3004 supplies sufficient DC power for the terminal’s internal charger.
Insert a NEO terminal in the docking station. When installed in the
docking station, the terminal’s battery charge LED will illuminate to
indicate applied external power and may charge the internal battery.
During charge the terminal LED will be a slow flashing green or solid
•
yellow, depending on the charge progression. Flashing green indicates
a preliminary charge state. Yellow indicates ongoing charge.
When the battery capacity reaches 95%, the LED turns solid green.
•
3.2 Ethernet Connection
Ethernet connection will be made when:
The NEO terminal is in the docking station;
•
The docking station is powered by the Power Adapter;
•
The docking station is connected to Ethernet network using a Category
•
5 cable plugged into the RJ45 rear socket.
The rear-mounted RJ45 connector incorporates a green Link LED that
flashes to indicate the presence of data traffic. The yellow Speed LED is
steady ON when the network is 100 Mbps and OFF when the network is
10 Mbps. (See figure 3.1, page 5)
Summary of Contents for PX3004
Page 16: ...400217...
