Appendix D: Teklogix Imagers Applet
Selecting a Camera
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
D-13
This window lists all the presets, both predefined and the custom. Presets are identified
as follows:
•
Predefined presets are marked as read-only. For a description, review “Predefined Pre-
•
Predefined presets are marked as ‘R’
read-only
.
•
Custom presets are marked as ‘RW’
read and write
.
•
One preset—either predefined or custom—is marked as ‘A’
active
.
The top port of the window displays the bar code decoding camera presets.
D.4.1
Selecting a Camera
To select a camera:
•
Tap on the
Camera Presets
drop-down menu to view the camera options.
•
Choose a
camera
—specifically,
Front Imager
which is located at the top of the unit.
D.4.2
Setting the Active Preset
An active preset has an
A
to the right; in Figure D.3 on page 16, the active preset is
Default
.
To set an active preset:
•
Highlight the preset, and tap on the
Activate
button.
D.4.3
Viewing a Preset
To view the parameter settings in a preset:
•
Highlight a preset, and tap on the
View
button.
The associated preset window is displayed.
Note: The top portion of the window displays the bar code decoding camera presets.
