D-16
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Removing a Custom Preset
- Highlight the parameter and then press the
[SPACE]
key, or double-click on the
parameter. Either method toggles between the two available values.
•
When you’ve completed your edits, tap on
OK
.
The parameter list is displayed; the new value for the changed parameter is shown.
•
Tap on
OK
to exit to the preset list and save the changes.
D.4.6
Removing a Custom Preset
•
Highlight the custom preset you want to delete, and tap on the
Remove
button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on
Yes
to remove the preset or
No
to cancel the operation.
D.4.7
Configuring the Bar Code Decoding Symbologies
To configure the bar code decoding camera presets:
•
Tap on
Start>Settings>Control Panel>Teklogix Imagers
.
•
Tap on the
Barcoding
tab.
Figure D.3 Viewing Bar Code Decoding Symbologies
