C-50
Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
PDF-417
C.4.14 PDF-417
Enabled
Setting this parameter to
on
enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.4.15 Micro PDF-417
Enabled
Setting this parameter to
on
enables “Micro PDF-417” bar code scanning. Micro PDF-417 is
a multi-row symbology that is useful for applications requiring greater area efficiency but
lower data capacity than PDF-417.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-14 for details.
C.4.16 2D Data Matrix
Enabled
Set this parameter to
on
to enable “2D Data Matrix”.
Inverse Video Mode
Enabling this parameter allows the imager to read inverse bar codes—white symbols pre-
sented on a black background.
Important: To successfully read this type of bar code, the two types of symbologies
included in the composite must be enabled. In addition, “Center Barcode
Only” must be disabled (see page C-42).
