netpad
user guide
12
Using the Scanner
Where fitted with a barcode scanner, the netpad may be
used to read industry standard barcodes.
WARNING:
For your own safety, it is critical
that you comply with the
following warnings:
1. Do not look into the laser beam.
2.
CAUTION
– Using controls or adjustments, or performing procedures other than
those specified herein may result in hazardous radiation exposure.
3.
CAUTION
– The use of optical instruments with this product will increase eye hazard.
4. This product contains a laser scanner that emits less than 1.0 mW average radiant
power at a wavelength of 650 or 680 nm. This product complies with 21 CFR 1040.10,
1040.11 and DIN EN 60825-1: January 2001, and is classified as a Class 2 laser product.
Scanner Window
13
To scan a barcode, point the scanner window at the barcode, ensuring that the scanner
window is not obstructed, and activate the scanner as instructed in the software
application’s operating instructions. The scanning beam should be energized until a
successful decode is achieved or one second has elapsed.
Care of the netpad
The netpad is designed to withstand water, dust, storage temperatures of -20°C to +60°C
and humidity of 0% to 95% maximum non-condensing and when used according to the
instructions in this manual, the netpad should remain in good working order for many years.
However, there are certain precautions you should take to ensure continued trouble-free
use:
• Do keep the netpad at a temperature of -20°C to +60°C and avoid sudden extremes
in temperature, exposure to direct sunlight or rain, heat sources (electric heaters, etc.),
dust, sand, and other fine particles.
• Do keep the netpad away from strong magnetic fields (e.g. loudspeakers) and sources
of static electricity.
• Use only the Psion Teklogix approved Docking Station.
• If you will not be using the netpad for a while, store it in a place that is dry, free
from damp, dust.
