Quick Start Guide
Kit Contents
WireXpert (Local and Remote)
Headset
CAT6A Channel Adapters
12V DC Power Adapters
CAT6A Permanent Link Adapters
Soft-case
USB Flash Drive
Calibration Certificate
The WX4500 WireXpert kit comes with all the accessories necessary
to perform a certification test up to CAT6A or Class EA limit in either
channel or permanent link configuration. If you have purchased
the Fiber or Class FA certification options, you will be provided with
additional equipments.
A calibration certificate with the date of calibration and validity
guarantees accuracy of measurements on your WireXpert for that
period. The local and remote units are identical physically, however
the test results are stored only in the local unit.
Power ON/OFF Button
Speaker
DC Input
10/100 Mbit/s Ethernet Port
USB Host Port
USB Device Connector
Mic / Headphone Port
5
6
Using the eXport software
1. Launch eXport software.
2. Create a new project by going to File > New Project or click
3. To import saved results, go to
• Import > Device for direct USB connection or click
• Import > USB Flash drive for importing from USB flash drives or click
• Import > From PC for importing from local hard drives
4. To view detailed results, double click on the cable label and a new window
with comprehensive results and plots will be opened.
List-Based Testing
Hierarchy Label List Generation
The Label List Generator generates cable labels in customizable hierarchical
(building name-> floor-> telecom room-> rack-> panel-> port) order before
conducting cable certifications, reducing effort from keying labels after
every test. The pre-defined labels imported into the device will prevent
duplicate testing when conducting in non-sequential orders.
To create label list,
1. Launch eXport and go to Tools > Label List Generator.
2. Enter the first and last label of each tier into the respective fields.
3. Tiers can be disabled by unchecking if it is not applicable.
4. Click the “Save” button to save the list based labels.
5. Insert USB flash drive to PC and click the “Export to USB” to begin export.
WireXpert4500_Copper_IT_EN_Q_201510_302
To load label list,
1. Insert USB flash drive to Local unit of WireXpert.
2. Select “Label List” and select the label list you want to import.
3. Select “Copy Label Files”.
4. Press the “SETUP” button > Project Settings > Label Source
5. Select “List Based Testing” and select the label that has just been imported.
6. Press the AUTOTEST button to view list and select label for test.
After every test,
PASS
and
FAIL
will be indicated accordingly.
For more information, please contact us at
or visit
www.psiberdata.com
