manualshive.com logo in svg

PSG Wilden P220 Series, Engineering, Operation & Maintenance

Share
Download
PSG Wilden P220 Series Engineering, Operation & Maintenance Download Page 2

T A B L E   O F   C O N T E N T S

SECTION 1

  CAUTIONS—READ FIRST!

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

SECTION 2

  WILDEN PUMP DESIGNATION SYSTEM

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

SECTION 3

  HOW IT WORKS—PUMP & AIR DISTRIBUTION SYSTEM

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

SECTION 4

  DIMENSIONAL DRAWINGS

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

SECTION 5

 PERFORMANCE

P220/P230 Metal Rubber-Fitted   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
P220/P230 Metal TPE-Fitted   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .6
P220/P230 Metal Reduced-Stroke PTFE-Fitted   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
P220/P230 Metal Full-Stroke PTFE-Fitted   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7
Suction-Lift Curves   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .8

SECTION 6

  SUGGESTED INSTALLATION, OPERATION & TROUBLESHOOTING

   .  .  .  .  .  .  .  .  .

9

SECTION 7

  DISASSEMBLY / REASSEMBLY

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

12

Air Valve Disassembly    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .15
Reassembly Hints & Tips   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .18

SECTION 8

  EXPLODED VIEW & PARTS LISTING

P220/P230 Metal

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

19

SECTION 9

  ELASTOMER OPTIONS

   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

21

Summary of Contents for Wilden P220 Series





























Reviews:

No comments

Brands by name

Popular brands

Load more brands