6
SMOKE DETECTOR
We highly recommend the use of a smoke detector. It should be installed at least 15 feet (4,57 m) from the
appliance in order to prevent undue triggering of the detector when reloading.
DOOR GLASS
To maintain a clean and safe installation, do not build your fire too close to the glass or allow the fire logs to lean
on the glass.
Do not operate your furnace at too low a setting. Keep the air inlet opened long enough during the fire start-up to
prevent the fire from going out, which would stain your glass.
An intense fire will help keeping the glass clean. However, in the event that your glass gets stained, which should
not occur, you will have to clean it using a wet cloth and an oven cleaner. The glass can be cleaned
ONLY
when
the unit has cooled down. Do not use abrasive cleanser. Wood stove glass cleaners are available on the market
and their efficiency makes no doubt.
WARNING: Avoid knocking or scratching the glass which could be damaged.
GLASS SPECIFICATIONS
The glass is made of Pyroceram type of glass, 3/16” – (5 mm) thick.
Do not operate your furnace with a broken glass, as this could seriously damage your appliance.
You can purchase your replacement glass from your dealer.
