13
the operator desires to check the tape inputs, he or she simply switches the
headphone select rotary switch to “Return” and your headphones are
automatically switched to monitor the tape return inputs. If you are not using any
form of tape monitoring, you can also use this input to be able to monitor an iPod
or other similar audio source for your convenience.
Headphone Selection
The headphone feed has a rotary selection switch that has five positions. They
are labeled as:
LEFT
Provides Left output channel audio to both ears
STEREO
Provides Stereo audio to the headphones
RIGHT
Provides Right output channel audio to both ears
MONO
Provides a Mono Mix of the Left and Right Audio
RETURN
Provides Return audio in Stereo mode
The headphone outputs are rated to operate into headphones with impedances
from 20 to 600 ohms. As with all headphone use, please monitor your
headphone volume carefully and always use the lowest practical volume setting.
Excessive sound pressure levels may cause permanent hearing loss.
Remember, your ears are your livelihood, Turn it Down!
Headphone Volume
Headphone volume is adjusted by using the volume pot located just to the right
of the headphone audio selection switch. This headphone volume control allows
a full range of adjustment from fully off (counter clock-wise) to fully on (clock-
wise). Please be careful when setting headphone volume levels as excessive
headphone levels may cause permanent hearing damage. User determines
proper and safe operating levels depending on make and model of headphones
used.
