PSC PowerWedge 10, User Manual

Page: 17 / 116

Programming the PowerWedge 10
User’s Guide
12
Programming the
PowerWedge 10
The PowerWedge 10 is configured with certain default parameter settings
before it is shipped from the factory. These predefined defaults will work
for most applications. However, you may need to customize your settings
for the specific types of bar codes you will be scanning.
You can use any of the following methods to program the PowerWedge
10:
• Predefined-default programming— see page 13
• Auto-Learn— see page 14
• Menu programming— see page 15
• Bar code batch programming— see page 17
• On-screen programming— see page 19
• Serial batch programming— see page 23
• Cloning— see page 24
NOTE
See
Programming Options on page 34
for the default settings for all code parame-
ters.