amplifier or power amplifier to the
High Level Input
of the subwoofer.
Use standard speaker cable and maintain po –, as well as right
and left side.
Speaker wires can be run onwards from the subwoofer directly to the
main speakers. This replaces running wires from the receiver or
amplifier to the main speakers. Twist the ends of each input wire from
the electronics together with the corresponding wire to the speakers
and insert them both into each corresponding input binding post of the
SubZero
i
. Be sure to avoid all contact between wires into the sepa-
rate binding posts.
B.
THE SUBSONIC™ 5
i
1.
Connecting Home Theater Equipment (SEE FIGURE 3, page 16):
Please see the instructions for the SubZero
i
.
2.
Connecting Stereo Equipment using Low/Line Level (SEE FIGURE 4,
page 17):
For this preferred connection, please see the instructions for
the SubZero
i
. Additionally, you may need to use Y-connectors at the
Preamplifier Output
to also send signals to the
Power Amplifier/Main
Input
.
3.
Connecting Stereo Equipment with High/Speaker Level (SEE FIGURE
5, page 18):
You also can get excellent sonic results by connecting the
High/Speaker Level Output
of your receiver, integrated amplifier or
power amplifier to the
High Level Input
of the subwoofer. Use standard
speaker cable and maintain po –, as well as right and left side.
High/Speaker Level Output
from the subwoofer allows speaker wires
to be run onwards easily from the subwoofer directly to the main
speakers. This replaces running wires from the receiver or amplifier to
the main speakers. The signals from the SubSonic 5
i
to the main
speakers are looped through, full-range.
C. THE SUBSONIC 6
i
1.
Connecting Home Theater Equipment (SEE FIGURE 3, page 16):
Please see the instructions for the SubZero
i
.
2.
Connecting Stereo Equipment using Low/Line Level (SEE FIGURE 4,
page 17):
If your receiver or integrated amplifier has preamplifier out-
puts, or if you are using a separate preamplifier, the preferred connec-
tion is from the
Preamplifier Outputs
of the electronics to the
Low/Line
Level Inputs
of the subwoofer. Use a dual RCA audio cable and maintain
right and left. (You may need to use Y-connectors at the preamplifier
outputs to also send signals to the
Power Amplifier/Main Inputs
.)
13
