Place the two AAA batteries supplied into the remote control. Be careful to ensure that it is correctly inserted according to the
polarity (+/-). You should only use the battery specified for this system. Caution: When replacing the batteries, ensure that you only use
standard AAA batteries which are not re chargeable. The use of an incorrect type of battery may cause severe damage to the remote or
risk explosion.
1. ON/Off
: Speakers from standby mode to operating mode. The LED on the front will indicate the color of the source last chosen.
2. Volume C/-
: Increase or decrease audio level. Release mute function.
3. Input Selection
: Toggle and select source. The LED on the front of the left speaker will change color, based on the active source:
Analog:
Cyan
Phono:
Green
USB:
Purple
Optical:
White
Bluetooth: Blue
4. Mute
: Temporarily mute audio output or restore audio output from mute.
5. Listening Mode Selection
: Press the “
MODE
” button on the remote control once to activate the display and cycle through the four
listening modes.
Mode
Effect
Color
Stereo
Normal
No
Color
Widesound
Expanded
Soundstage
Green
Dialogue
Enhanced
Dialogue
Clarity
Amber
WideSound™ Plus
Expanded Soundstage with Enhanced Dialogue Clarity
Blue
6. Subwoofer On/Off
: Subwoofer output can be activated using the supplied remote control, which will also redirect part of the low
frequency content to the subwoofer.
SUB
MODE
TREBLE
BASS
Remote Control
Power On/Off
Volume Control
Input Selection
Subwoofer ON/OFF
Treble Control
Bluetooth Interrupt
Input Selection
Mute
Sound Mode Selection
Bass Control