
CAM1 and CAM2 each have an alarm input. If an ALM and GND cables are shorted together,
its NO-alarm will activate. The Indoor monitor will continue to ring for 120 seconds until
button is pressed. The monitor will then return to Standby mode.
For models with installed MicroSD card, an alarm will also trigger a snapshot or recording
(depending on which setting is selected). The recording time is 120 seconds, or until
button is pressed. The monitor will then return to Standby mode.
There is an alarm input for each of the two camera channels. Each alarm input can be
configured to accept either a Normally Closed (NC) or Normally Open (NO) alarm inputs;
or be turned OFF.
A NO-alarm input will trigger an alarm event when the ALM & GND cables are shorted
together. Conversely, a NC-alarm will trigger an alarm event when the ALM & GND
cables are disconnected (open circuit).
WHITE=ALM
BLACK=GND
YELLOW=VIDEO
Summary of Contents for panacom PAN930FKHD
