By default, Door1, Door2, CAM1 and CAM2 can be monitored. To disable monitoring of Door2,
set "Door2 Status" to OFF in the Mode menu. To disable monitoring of CAM1 and/or CAM2, set
their corresponding "CAM1" and "CAM2" switch to OFF in the Alarm menu.
If you are only using one Door Station, you can exit Monitoring mode by pressing the
again (when Door2, Cam1 and Cam2 have been disabled in the menu).
If you are using two indoor units, both can simultaneously monitor the same door
station. The same image will be displayed on both monitors.
If either door station calls while the user is in Monitoring mode, the monitor will ring,
exit monitoring mode and display video of the new caller.
With an MicroSD card installed, the first press of button will start recording (if
the recording setting is active); or will take a snapshot (if the snapshot setting is
active).
Each monitoring time is 60s
Press the Unlock button
on the indoor unit, the
electric lock will be opened
Press the
Hang up button
to end the call
Close display
Note:
