PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent
Street, Burwood 3125 Victoria, Australia warrants this
product for a period of 12 months from the date of purchase,
as reflected on the Authorised Reseller's or Distributor’s
invoice / receipt provided to you. PSA Products Pty Ltd will
repair or replace the product (at the option of PSA Products)
due to any manufacturing defect, at the cost of PSA Products
Pty Ltd (excluding any labour costs relating to removal or
re-installation of product, and transport costs).
This warranty shall not apply to the product if it has been
damaged, modified, abused or altered after the date of
purchase, or if it fails to operate due to improper maintenance.
To the extent permitted by law, the liability of PSA Products
Pty Ltd arising from the sale or under the terms of this limited
warranty shall not in any case exceed the cost of replacement
and subject to this clause. In no case shall PSA Products Pty
Ltd be liable for consequential loss or damages resulting from
the failure of the product or breach of this, or: Any other
warranty, express or implied, loss or damage caused by failure
to abide by the instructions supplied in the leaflets.
To the extent permitted by law, PSA Products Pty Ltd., makes
no warranty, expressed or implied, written or oral, including
that of merchantability or fitness for any particular purpose,
with respect to the consumer replaceable battery if any.
This warranty is provided in addition to other rights and
remedies you have under law:
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure. What constitutes a major failure is
set out in the Australian Consumer Law.
To make a claim under warranty, take the product (with a
proof of purchase) to the store where you purchased the
product or contact PSA Products Pty Ltd.
Phone (03) 9888 9889. or Email:
[email protected] with details, proof of purchase
or expense claim in writing.
Figure 2: Connection of LIFSAIR without
using 9V input.
Please note: If the LIFSAIR is used without connecting
the 9V input, then only one isolation relay can be used in a
interconnected system. If the 9V is connected, then multiple
LIFSAIR can be used on one interconnected system.
Interconnected system using a CO alarm must use the 9V
output from the smoke alarm.
1. Secondary Contacts NO and NC are activated
by smoke alarm interconnect switch wire
2. Contacts are rated 240V AC 5Amps
SM pulse
SWTICH
SM latching
CO
9V
Figure 1a:
2
TECHNICAL NOTE
The wiring connecting the module with the external device
is not supervised. Be sure to test the operation of all the
devices controlling the module or controlled by the module.
Devices controlled by the module can be tested by pushing
the test button on the alarms and verifying that the
controlled device responds in the desired manner. Devices
controlling the module can be tested by activating the
device and verifying that all of the interconnected alarms
enter alarm.
WARRANTY.
Another Quality Product by:
PSA Products Pty Ltd
17 Millicent Street, Burwood
Victoria 3125 Australia
Telephone: (03) 9888 9889
Facsimile: (03) 9888 9993
e-mail: [email protected]
web-site: www.psaproducts.com.au
1201-7203-01
SM pulse
SWTICH
SM latching
CO
240V SUPPLY
SMOKE / HEAT ALARM
LIFSAIR
NO
C
NC
GND
S
9V
TO SECURITY PANEL OR
OTHER CONTROLLED
DEVICES.
A
A S N
N
A S N
A S N
Normally Close
Relay:
Detector input:
Common
Normally Open
9VDC input
Switch line
GND/N
Pulse
Latching
CO latching
Settings:
