7
Smart Gate Series
Rev022520
© 2020 PS Industries
®
Incorporated. All Rights Reserved.
Installation
STEP 7.
Slide 1
3
/
4
” Upper Lift Arm (
blue decal
) into 2” Lift Arm (
red decal
).
a. Insert
3
/
8
” x 2
1
/
4
” hex bolts and
3
/
8
” nylock nuts at pre-drilled holes.
NOTICE
To protect the Powder Coat finish, do
not slide beyond desired length.
Step 7
Illustration A
Step 7
Illustration B
STEP 6.
Use rubber mallet to gently hammer flange bearings into both sides of 2” Upper Lift Arm.
a. Slide 2” Upper Lift Arm (
red decal
) into Adjustable Clevis (
red decal
) on Gate Post.
b. Insert
3
/
8
” x 3” hex bolt and tighten
3
/
8
” nylock nut.
Step 6
Illustration A
Step 6
Illustration B
4
10.2
10.12
10.4
10.4
10.7
4
6
Red
Decal
Red
Decals
