PS Engineering
PCD7100 Series Audio Selector Panel and Intercom System
Installation and Operator’s Manual
3.6
PCD7100-P CD Player Only (Part Number 11952, 11953, 11958 and 11959)
MUSIC
VOLUME
MUSIC
TONE
PUSH
ON-OFF
PLAY SKIP FWD SKIP BACK STOP
EJECT
ACK
3.6.1 Power/Volume
Knob
Pushing the right-hand knob switches the PCD7100-P on. Push again to turn off. Rotate the knob to in-
crease volume on the music output.
3.6.2 Operating the internal CD Player
The single-disk CD player is designed for simple operation. There are five buttons with the following func-
tions.
►
(Play) Plays CD, push again to pause
►►
(Jump Forward) Push to jump to the next track, hold to fast forward in current track
◄◄
(Jump Backward) Push to jump to the previous track, hold to rewind in current track
(Stop) Stops playback
▲
(Eject) Ejects disc
The CD player will begin to play automatically when a CD is inserted. Press the play button to pause the
track.
The jump forward button advances to the next track. Jump backwards selects the previous track.
On MP3 units (11954, 11956, 11957, 11958), pressing the Jump Forward and Jump Backward buttons at
the same time will toggle the unit into a random play mode. Random Mode is particularly useful if the disc
contains a large number of files.
Stop ceases play, and Eject removes the disk from the CD player.
3.6.3 Tone
Control
Turning the left-hand knob modifies the bass/treble of the music output to suit individual tastes.
3.6.4 Audio Messaging system (11953 and 11954 only)
When this option is installed, the PCD7100-P contains six stored messages. An outside annunciator, such
as an Electronics International engine gage system triggers these messages. When there is an announce-
ment, it will be repeated every two seconds until the remote- mounted ACK button is pushed. This stops
the played annunciation, until the next announcement is required (the next falling edge).
200-971-0005
Page 3-5
Rev. 5, Dec. 2002
