PS Engineering Inc. ®
PAR100EX Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-760-0000
Page 2-14
Rev. 11, Feb. 2013
Carefully reassemble the unit.
2.12 Reassembly
3.
Using the nylon spacer removed in step 2, compress the spacer so it becomes ob-
long.
Figure #3
a.
Install one long screw through the top lid, near the front edge on the power
supply board side, and add then add the nylon spacer from § 2.8.
Figure #4
4.
Place the lid back on the unit aligning holes.
5.
Install qty. 3 more long thread screws into the lid.
