4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.pspower.com
Questions and Answers 6
Questions And Answers
©2006 PS Audio International Inc. All rights reserved.
®
Owner’s Reference
Quintessence Power Center
Quintessence Power Center. Look for the company logo and press it.
You do not have to use the Power Amp IsoZone on the Quintessence Power Center for a power amp.
It is marked like this for convenience.
All IsoZones are identical in build and all use our new Nano Crystalline soft magnetic material to clean
the AC power.
You can plug the Control Center into a 15 amp or 20 amp receptacle without any problems (half of
that current in 220 volt countries).
MultiWave and CleanWave are not available on the Quintessence Power Center even though they are
indicated on the Remote Control.
The front panel metering system can
monitor either voltage or distortion. In
the voltage mode, you can monitor the
incoming voltage (from the wall). In the
THD harmonic distortion mode, you can
monitor incoming THD (from the wall).
The output frequency of the Quintessence
Power Center is the same as your country’s
AC frequency. In North America, the
frequency of the AC line is typically 60Hz.
In Europe and Asia, the output frequency
is typically 50Hz. The Quintessence
Power Center’s output frequency cannot
be adjusted.
The Quintessence Power Center is specifi c to your country’s voltage. Do not use the Quintessence
Power Center on a voltage higher than it is rated for. For instance, do not take a 120 volt rated
Quintessence Power Center and attempt to use it in a 230 volt country. Failure to observe this
cautionary note will void your warranty and may damage the Quintessence Power Center. If you need
to operate the Quintessence Power Center at a voltage other than the voltage it was designed for,
contact your dealer, distributor or the factory.
15 or 20 amp
Will it work on
other voltages?
Power Amp
receptacle?
MultiWave and
CleanWave
Front panel
metering system
Output
Frequency
