2
Warning
To prevent fire or shock hazard, do not
expose the unit to rain or moisture. To avoid
electrical shock, do not open the enclosure.
Refer servicing to qualified personnel only.
To prevent electric shock, use a 3 prong,
grounded type power cable.
Any change or modifications not expressly
approved in the manual could void your
warranty.
Safety Instructions
Any turntable or equipment with AC
synchronous motors, such as some cooling
fans should not be used with MultiWave II.
This equipment must be used with 60Hz
SineWave mode.
We recommend the use of the SineWave
[sin] or TubeWave [tub] with any type of
tube based audio products.
Read the operating instructions provided
with the P300.
Retain the operating instructions for later
use and reference
Unplug the P300 from the wall outlet before
changing the fuse or performing any clean-
ing or service.
Do not operate the P300 near water. Avoid
placement near a water reservoir or exces-
sive moisture.
When replacement parts are required, be
sure they are specified by the manufacturer
to have the same characteristics as the
original part. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
Do not operate with faulty or frayed power
cables.
Do not operate the P300 with the LED load
indicator when illuminated RED or YELLOW
for extended amounts of time.
Overview
The Power Plant P300 is a power
regenerator capable of delivering the highest
level of AC performance to all audio and
video components.
The PS Audio Power Plant P300 is
designed to operate as a stand-alone power
management device, or as part of a larger
power management system. The P300 is
capable of producing, clean and safe power
for a small 2 channel audio system or small
home theater system.
The P300 is capable of delivering up to
300 watts of peak power, depending on
the load.
• Up to 300 watts power delivery -
depending on load requirements.
• Next generation MultiWave II technology
featuring TubeWave.
• Independent power zones keep power for
analog, digital and high current equipment
electrically isolated.
• Regenerated AC delivered through 4
Power Port outlets.
• Front panel display for systems monitoring
and user interface.
• Front panel displays waveform setting,
output voltage and wattage.
• Reduction of AC line noise by more than
70dB.
• High voltage surge suppression devices
for surge and spike protection.
• Lower AC impedance for better transients
Summary of Contents for Power Plant P300
Page 1: ......
