off using the front panel power button, let it sit for a
few seconds and power it back up. If the “FAULT”
message continues to appear, please contact your
dealer for additional service.
How do I reset the settings to factory default?
The P1000 was designed to easily reset the micro-
processor back to the original factory default. If the
P1000 is displaying any characters in the front panel
that seem abnormal, if the front panel buttons do
not correlate with the display read-outs or to simply
reset all settings back to the factory defaults follow
these instructions.
With the unit powered off, hold down both Mode
buttons (Up and Down) and press the Power button.
This will activate the Setup Display Mode. Using the
Mode Up or Down buttons, cycle to the “RESET”
mode. Press either Edit button (Up or Down) and
the display will read “GO ->” to confirm the choice.
Press either Edit button again to perform the reset
function. Once it is complete, the P1000 will exit the
Setup Display Mode automatically.
Specifications
Output:
Power
-
up to
1000 Watts
Voltage
-
95-250 Volts
(depending on model)
Current
-
7 Amps
Frequency
-
50-120 Hz
Peak
-
10 Amps (soft limit)
Distortion (THD+N) -
0.1%
Input:
AC input range
-
90-250 Volts
(depending on model)
Frequency input
-
50/60 Hz
(depending on model)
Input capacity
-
1800 VA
Power consumption -
35 Watts
(with no load)
General:
W x H x D
-
17 x 9 x 20 in
Weight
-
87 lbs
(unboxed)
Cooling system
-
massive heatsinking
Warranty and Service
Inside the U.S. and Canada
PS Audio’s warranty is 3 years parts and labor, from
the date of original purchase. The warranty follows
the product itself regardless of ownership, new or
used.
Outside the U.S. and Canada
PS Audio has authorized distribution in many coun-
tries of the world. In each country, the authorized
importing retailer or distributor has accepted the
responsibility for warranty of products sold by that
retailer or distributor. Warranty service should nor-
mally be obtained from the importing retailer or
distributor from whom you purchased the product.
In the unlikely event of service required beyond the
capability of the importer, PS Audio will fulfill the
conditions of the warranty. Such product must be
returned at the owner’s expense to the PS Audio
factory. Contact your PS Audio distributor or the PS
Audio customer service department for more infor-
mation.
Service issues
Should your unit ever require service or if you have
any technical questions about the P1000, you must
either contact your dealer (PS Audio if purchased
direct) or your PS Audio distributor. No equipment
will be received at our service facilities without an
attached RA number.
If purchased through an authorized PS Audio dealer
or distributor, the RA number must be obtained by
the dealer or distributor. If the product was purchased
from PS Audio direct, this can easily be obtained by
calling PS Audio at
720-406-8946
or by contacting
us via E-mail at
.
11
